Wilwood Front & Rear Disc Brake kit,1971-1976 Caprice,Impala,Donk,P30,12" Rotors

Description

P30 Step Vans
This kit was CREATED to RECOVER Braking lost by
installing TALLER RIMS and TIRE  packages
very common on Caprice / Impala and Riviera Custom / Classics
Larger diameter rims with
STOCK FACTORY BRAKES
result in
less
braking than the   original  15" STOCK rims
due to the INCREASED LEVERAGE  (Diameter)
of bigger tire and rims
The only way to INCREASE BRAKING IS ...
A) INSTALL  LARGER ROTORS
B) UP-GRADE TO TWO PISTON CALIPERS
( STOCK GM WERE SINGLE PISTON )
THIS KIT HAS LARGER ROTORS and TWO PISTON CALIPERS
Plus benefit  of having modern FOUR WHEEL DISC BRAKES
FRONTS  Bolt on for All 1971-1976 Caprice & Impala,Riviera
(with disc brake Spindles)
REARS  Bolt on for All 1971-1976 Caprice & Impala,Riviera
As long as you have CHEVY REAR END
READ axle flange memo in case you HAVE GM Pontiac / Olds / Buick housing
We have SPECIAL REAR END backing plates for cars that have NON CHEVY Housing
Fits axle flange in the picture
Click on PHOTO  TOP LEFT CORNER OF AD
to verify you have a CHEVY HOUSING
(  When photo loads ... click on ENLARGE  to go full page )
Must have 16" or Larger wheels
Your choice of Red - Black Calipers
D154 Rear Parking Brake Kit
D154 Pro-Series rear disc kits provides a complete solution for popular muscle car rear axles that require a parking brake. Forged D154 dual piston calipers, 12.19” one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. D154 rear caliper kits offer a complimentary match to vehicles using Wilwood D52 or D154 calipers on OE spindles. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance.
Wilwood's D52 Front Caliper Kit is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1968-96 GM Passenger Vehicles and Trucks. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D52 calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE 7/16-20 banjo bolt brake line mounting. Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.00” piston provide 6.28 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads. Matching rear calipers are also available for custom installations
NOTE ... This AD has a SPECIAL OFFER of a 14 DAY Buyer   RETURN
A) Buyer pays shipping ( as per eBay return terms )
B) Kit must be NOT HAVE BEEN INSTALLED  ( no marks on any parts )
C) Must be 100% in same boxes as originally shipped with (proper) packing
Includes Stainless Braided Brake Lines & New E-brake cable
Ebay (not us) Is now adding Internet sales tax to orders.
It is being done to all ebay sales. (Not just ours)
DEAR EBAY SHOPPER  ... We just revised many of our ads  ( WILWOOD and QA1 )
from 3 day handling time to 30 day handling times... This is 100%  due to the COVID
ISSUES for the past 12 months.
MOST OFTEN we can ship in 1-3 days .... and we
will WHENEVER POSSIBLE ... Notify us when your order is URGENT and we will do
our best for you ....WE WILL REFUND ANY ORDER that you ask for a REFUND.
We
even have COMPETITORS ship your order for us when they have STOCK and our 7
warehouses have COVID  Quarantine issues . Davis Motorsports of Reno and GoRacin
Racers Emporium. have been in business since 1958.
The HANDLING TIME is only when we have to USE  DIRECT SHIPMENT when no-one
else has your part numbers .The handling time will revise from week to week based on
current stock. We sell approx 200 Wilwood and QA1 kits per week and often the in stock
levels change from hour to hour...    THANK YOU ...you are our very valued customer