RC H-King (PNF) Avro Lancaster V3 "Dumbo" British WWII Heavy Bomber (1320mm)

Description

RC Turnigy Accucel-6 80W 10A Balancer / Charger LiHV Capable
visit our store
view feedback
add favorite
about us
contact us
categories
Battery Chargers & Acc.
Boats & Parts
Brushless Motors
Cars & Bikes
ESC, UBEC, VR
Gas/Glow Engines & parts
Hardware & accessories.
Helicopters & Parts
LiPo, LiFe, NiMH Battery
Other
Planes ARF,RTF,KIT
Power Systems
Quadcopters & Parts
R/C Tank
Servos and parts
Telemetry & FPV
Tools
Tx/Rx Systems & Parts
RC H-King (PNF) Avro Lancaster V3 "Dumbo" British WWII Heavy Bomber (1320mm) ID: 9306000507-0
description:
Following on from versions 1 and 2 of the H-King Avro Lancaster, this version 3 represents the lightest and most well-mannered version yet.
The V3 Lancaster is designed to be the most lightly loaded version of this classic model and therefore the best performing, it is a Lightweight, Heavy Bomber, thats hand launch-ready right out of the box. A differential thrust set-up for added yaw control and far more realistic flight performance is the key recommendation to get the very best out of the model, but shell happily fly on throttle, elevator, and aileron control alone. The V3 Lancaster can now achieve up to 7 minutes flight time on a 1400mAh 3S, but still has the option of an electric retractable undercarriage for those that wish to have it. Weight over the earlier versions has been further saved by removing the opening bomb-bay door mechanism and servo, complete removal of the undercarriage, and removal of the tailwheel steering servo. This lighter weight makes hand launching a simple and trouble-free affair, slow, and realistic scale flight is greatly improved for those low, slow bombing passes, and less power is required meaning greater flight times.
The Lancaster was a British WWll heavy bomber that was designed and manufactured by the Avro Company in England. The Lancaster was powered by four Rolls-Royce Merlin engines and first saw service in 1942 and has become one of the most famous aircraft of WW2. It was at the core of RAFs Bomber commands strategic bombing offensive over Europe and it was the main aircraft for the night-time bombing campaigns that followed. The HobbyKing V3 has been finished in a new, authentic color scheme which depicts 619 Squadrons 'Dumbo' PG-D aircraft that operated from RAF Strubby, Lincolnshire, during 1943-45.
The fully molded EPO foam 'Plug N Fly' Lancaster V3 comes pre-painted with scale panel lines, the decals are factory applied, motors and ESCs are pre-wired and installed, the elevator and aileron servos are also pre-installed. Assembly is very straightforward, the canopy, gun turrets, and .303 machine guns need to be fitted, servo pushrods installed, and the tailplane needs gluing in place. Scale 3 blade propellers with spinners and molded cowlings finish off the Lancasters stunning scale detail which makes this a practical, must-have model for any scale or warbird enthusiast. Battery and radio access is very easy through the bomb-bay doors and these are held closed while flying with some strong permanent magnets. The two-piece wing simply slides onto the wing joining spars and is held in place with two screws. However at 1320mm, the Lancaster is very easy to transport in one piece, so if you wish, the wing can be glued in place too for extra security.
Features:
• Plug N Fly, just add receiver and flight battery
• Thin plastic gear door skid plates pre-installed for belly landing operations
• Fully molded EPO airframe with scale panel lines
• Detailed graphics and finish in authentic Bomber Command 619 Sqd 'Dumbo' color scheme
• Lightweight out of the box set-up for slow, scale, realistic flying
• Intended for use with differential thrust set-up via modern radio transmitters for yaw control
• Option for fitting electric servoless retracts
Specs:
Wingspan:
1320mm
Length:
900mm
Flying Weight:
1065g (depending on set-up)
Motor:
4 x 2627-1500KV brushless
ESC:
4 x 15A brushess (non-UBEC)
Servo:
3 x 9g
Propellers:
2 x Std 6x4, 2 x Reverse 6x4
Required:
4~6ch transmitter and receiver
3S 1300~2200mAh (25C or greater) LiPo battery
Suitable LiPo charger
Optional Accessories:
Electric servoless retracts
9g steerable tailwheel servo
Note:
A copy of the building and flying instructions is available under the
'Files'
tab.
shop at hobbyking with
confidence
payment method
We only accept payment via Paypal through eBay system. All payments should be made within 2 days after the auction. There are no other additional charges.
shipping detail
All orders will usually be processed within 1 business day of payment. Transit time will vary depend on shipping method and Customs clearance.
*** International buyers - Please Note: ***
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipment charges.
return policy
If you are not happy with your item, you may return it for a full refund on the price of the product. This must be done within 30 days of the purchase arriving and the product must be in new condition with original packaging and all included accessories. Returning Shipping Cost will be paid by buyer.
contact us
Please feel free to contact us if you have any other questions about the item. We will respond within 1 working day.