Kit RC Piper Super Cub Pa-18

Description

Piper Super Cub Pa-18 - Remote control model aircraft assembly kit
Wingspan: 1930 mm
Length: 1230 mm
Recommended takeoff weight: ~2 kg
ATTENTION! This kit is created as base kit for creative and experienced in assembling kits  modelists .
What is included in the kit?
Laser cutted plywood  parts (3 mm)
Laser cutted styrofoam parts (5 mm)
Сockpit transparency (PET, 0.3 mm)
Driven nuts М4 - 4 pcs.
Screws M4 - 4 pcs.
Screws M2 - 10 pcs.
Screws M3 - 4 pcs.
M2 nuts - 10 pcs.
M3 nuts - 4 pcs.
What else do you need to buy to build a model?
Depron sheets 3 mm, size ~1000*500*3 mm - 10 pcs
Bicycle spokes (Ø2 mm), with nuts, length ~ 280 mm - 6 pcs
Threaded hairpin M4, length ~ 150 mm - 1 pcs
Model wheels (Ø120-160 mm) - 2 pcs
Tail Wheel Set  - 1 pcs
Control rods, length ~ 120 mm
What kind of electronics is required?
Brushless electric motor, ~ 650-800W, for a propeller with a diameter of 12-14 inches. Weighing ~ 150-200 g
Speed controller (ESC) corresponding to the selected motor.
LiPo battery  3S or 4S, 1800-3000mAh
Servos, with metal gears, ~ 9-13 gr - 6 pcs.
Servo extensions, ~ 50 cm long - 4 pcs, ~ 30 cm long - 2-4 pcs, depending on your wiring on the model.
6-pin connector 2 pcs (for quick  and easy connection of servos in the wings).
RC transmitter (min. 6 channels) supporting flap programming.
RC receiver (min. 6 channels)