Great Planes STA-M ARF still New in Box.with Robart Struts Included

Description

NOTE SMALL PUNCTURE HOLE IN MONOKOTE BEHIND COCKPIT, FINAL PICTURE
Sold as is. Includes Robart struts!
This is a IMAA-Legal Glow Powered, Radio Controlled, Almost-Ready-to-Fly, Great Planes Ryan STA-M 1.20-size Sport Scale Airplane w/Top Flite MonoKote. For Intermediate to Advanced Flyers. Based on the Original Ryan STA ARF, but with Two Cockpits and a new Military Trim Scheme. FEATURES: All wood construction with built-up framework and a carefully reproduced oval-shaped, sheeted fuselage. Expertly covered with Top Flite MonoKote using: Aluminum, Cub Yellow, True Red, Insignia Blue, and White. Fiberglass cowl has accurate ducting and blister marks, and conceals engines in the recommended range for added realism. Wheel pants are also made of durable fiberglass. Both the cowl and wheel pants are factory-painted in three colors to match the MonoKote covering scheme. Spacious radio compartment offers plenty of room for easy on-board gear installation. Dual cockpit design includes clear windscreen, instrument panel decal and cockpit coaming for scale looks (see COMMENTS for pilots). Dual aileron and dual elevator servos give the Ryan control surface precision and authority. Generous Great Planes-brand hardware package is supplied, including smooth operating rod-in-tube elevator and rudder pushrods. Can be flight-ready in as little as 12 to 15 hours. Warranty: Sold as is. INCLUDES: Pre-built fuselage, wing halves and tail assemblies, fiberglass cowl and wheel pants, nylon adjustable engine mount, hardware package, 420cc fuel tank, pushrods, clear windscreen, instrument panel decal main and tail landing gear, 3-1/2" main wheels, 1" tailwheel, 2-3/4" spinner, fillets, turtle deck, photo illustrated instruction manual. REQUIRES: Engine: 2-stroke .61-.91 cu in (10-15 cc) (Engine mounts inverted and requires a Sport-Type Muffler.) or 4-stroke .91-1.20 cu in (15-20 cc) (Engine mounts inverted and uses a standard muffler.) Radio: 4 - 5 Channel (see COMMENTS) Servos: 3 Heavy Duty (2-elevator, 1-rudder) at least 45 oz/in or more 3 Standard (2-ailerons, 1-throttle) Servo Extensions 24": 2 (for ailerons) Y-Harness: 1 (for ailerons) Receiver Battery: One 1000mAh is recommended Misc. Items: Propeller, foam rubber, fuel filter, fuel tubing, remote glow adapter, switch & charge jack mounting set, black fuelproof paint for cockpit, 2 scale pilots, building and field equipment SPECS: Wingspan: 82" (2080mm) Wing Area: 1066 sq in (69 sq dm) Weight: 10.25-11.5lb (4650-5220g) Wing Loading: 22-25oz/sq ft (67-76g/dm2) Fuselage Length: 60" (1525mm) Airfoil: Semi-Symmetrical, Low Wing Center of Gravity: 4-3/16" (106mm) back from the wings leading edge next to the sides of the fuselage (balanced upside down). Control Throws- High Rate Low Rate Elevator Up and Down: 1" (25mm) 3/4" (19mm) Rudder Right and Left: 1-9/16" (40mm) 1-3/8" (35mm) Ailerons Up and Down: 3/4" (19mm) 1/2" (13mm) COMMENTS: Following is a list of Top Flite Monokote colors used and order numbers for six foot rolls: Aluminum-TOPQ0205 Cub Yellow-TOPQ0220 True Red-TOPQ0201 Insignia Blue-TOPQ0207 White-TOPQ0204 Pilots shown in the airplane is not included. Use part number WBRQ2625 for a 1/4 scale Standard pilot. Radio System Requirements: Because the Ryan uses dual elevator servos and because the servos must move in opposite directions (due to the way they are mounted in the fuselage), they cannot be connected with a "Y" connector (unless you have a "reverse" servo). Therefore, to fly the Ryan, a radio system capable of electronic servo mixing is required, so that one of the elevator servos can be reversed. If you do not have a radio with programmable mixing, there is another solution. Futaba has a servo reverser that you can use to make one servo move in the opposite direction, FUTM4150- SR-10 Dual Servo Reverser.