Epson L1800 1430 1400 1500W 1390 DTF Roll Control Module "Plug and Play"

Description

"Super Fast Shipping Guaranteed"
This is a Brand New DTF Module for the Epson L1800, 1430, 1400, 1500w and 1390. It is 100% Plug and Play and super easy to install as seen from the pics. This module will allow you to Feed DTF Roll Film forward and reverse.
Instructions:
(Note try not to plug ribbon cables in upside down)
1. Remove rear cover.
2. Unplug white plug for ASF Motor (Leave Unplugged)
3. Unplug and remove short ribbon cable that connects small ASF Relay Board to Mainboard
4. Unplug encoder motor from mainboard
5. Connect short wire from DTF Module to Encoder Motor
6. Connect long wire from DTF Module to Mainboard
7. Connect ribbon cable labeled (MB) to Mainboard
8. Connect ribbon cable labeled (RB) to ASF Relay board
9. All Done.
Increase or decrease the speed of the feed: Press and hold the middle button on the DTF Remote until the red light on the module starts flashing then press forward or backwards on the remote to increase or decrease the speed of the feed motor.